Xi'an Desun Uniwill Electronic Technology Co., Ltd.
Our Vision Aspire to be a leader in water quality monitoring - our pursuit is to be respected by customers, employees, partners and other companies in the industry. Core Values Rigorous, Efficient,
Add to Cart
● Easy use, no membrane, no electrolyte.
● Long lifetime, maintenance free and less calibration.
● No flow dependency and fast response.
● Immune to electrical interference, no chemical interference.
| Item | Parameters |
| Model | DS380 |
| Principle | Fluorescence analysis method |
| Measuring range | 0~20mg/L or 0-200% saturation |
| Response time | 3 sec |
| Accuracy | 1% |
| Protection level | IP68 |
| Installation | Submersible |
| Temperature sensor | NTC |
| Temperature range | 0~50°C |
| Temperature accuracy | ±0.2°C |
| Output | Support RS-485, MODBUS protocol |
| Power supply | DC 6~12V, current <50mA |
| Size | Φ26*155 mm |
| Probe cable length | Default 5 m, customized 10m, 15 m and 30 m cable |
| Fluorescent cap life | 1 year |
| Maximum working pressure | 3bar |
| Housing material | SS316/Titanium alloy |
Fluorescent cap daily storage
Put it in a protective cover with a moist sponge when not in use, so that the sensor stays wet for a long time. If the head of the sensor's fluorescent cap is dry for a long time, it will cause drift of the measurement result, so it needs to be immersed in water for 48 hours before continuing to work.
Notes:
1) Avoid exposing the inner surface of the fluorescent cap to sunlight.
2) Do not touch the fluorescent film with your hands.
3) Avoid any direct application of mechanical stress (pressure, scratches, etc.) to the fluorescent film during use.
Photos
